• CN XXX:  Number of times the “Start/Stop” key is processed. We will call it Compliance Number. (shown as CN XXX).

• CT XXX: Total time  instrument is used. We call it Compliance Timer (Shown as CT XXX).  10 Minute of treatment is equal to one unit. That is if display shows CT 010 it indicates that the total treatment taken from the instrument is 100 minute (10x10). Please do note that the compliance timer records in multiples of 10 only.

Note:- Treatment of less than 10 minutes will not be logged.

• Please make sure that you are not taking treatment or programming of any mode is in progress.

• Switch on the instrument using the Rocker switch when A and B flashing.

• Press Time Key and keep it pressed.

• Press Start/Stop key and keep it pressed

• Release Time Key

• Release Start/Stop Key

• The display will show CT XXX indicating the unit of total treatment time for which the instrument has been used.

• After 2 seconds of delay the display will show CN XXX indicating that the total number of times the treatment has been started (for minimum 10 minutes).

• The display will continue to show the above messages for at least 5 times.